Explore Our Video Library

Welcome to our Video Library, where you can discover and explore our collection of product videos. These videos are designed to help users with the set-up of Flexcell® equipment.

View all
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Fluid Shear

FlexFlow™ Assembly

This video details how to assemble your Flexcell® FlexFlow™ device and associated tubing to run in the following configurations:

  1. Flow and stretch mode with the FX-6000™ Tension System connected in line or
  2. Flow only mode.
Fluid Shear

Osci-Flow® with Streamer® Assembly

This video details how to assemble your Flexcell® Osci-Flow®, Streamer®, and associated tubing to run with a MasterFlex Peristaltic Pump.

Tension

Setting Up and Running a Drying Filter Regimen

This video details how to setup a regimen in the FX-6000™ software to run with a drying filter that is in-line with the Flexcell® FlexLink®.

Tension

Connecting a Drying Filter to the FX-5000™ FlexLink®

This video details how to connect a drying filter to the Flexcell® FlexLink®.

Tension

Connecting the Vacuum Pump and Pressure Reservoir

This video details how to connect a vacuum pump and Flexcell® pressure reservoir to your FX-6000™ Tension System.

Tension

Connecting a Water Trap in-line with the Flex Out Tubing

This video details how to connect a Flex Out water trap in-line with the Flex Out tubing in between your BioFlex® baseplate and Flexcell® Tension FlexLink®.

Tension

Connecting a BioFlex® Baseplate to a Tension FlexLink®

This video details how to connect a BioFlex® baseplate with a Flexcell® Tension FlexLink®.
Note: This video is for FlexLinks® with quick release ports (FX-5000™ units with serial number 50015241 and upward and all FX-6000™ units)

Fluid Shear

Streamer® Assembly

This video details how to assemble your Flexcell® Streamer® and associated tubing to run with a MasterFlex Peristaltic Pump.

Compression

Compression Baseplate Assembly

This video details how to assemble your Flexcell® Compression Baseplate for use with 6-well BioPress™ culture plates.

Tension

Connecting a Water Trap in-line with the Flex In Tubing

This video details how to connect a Flex In water trap in-line with the Flex In tubing in between your BioFlex® baseplate and FX-6000™ Tension FlexLink®.

Tension

Connecting the Pump and Power Control Cables on a Tension FlexLink®

This video details how to connect the power and pump control cables to the FX-6000™ Tension FlexLink® box.

Tension

Connecting Two Tension FlexLinks® to One Computer

This video details how to connect two FX5K™ Tension FlexLink® to a single computer.

Tension

Connecting One Tension FlexLink® to the Computer

This video details how to connect one FX-6000™ Tension FlexLink® to a single computer.

Tension

Connecting a BioFlex® Baseplate to a Tension FlexLink®

This video details how to connect a BioFlex® baseplate with a FX-6000™ Tension FlexLink®.

Tension

Tension BioFlex® Baseplate Assembly

This video details how to set-up a BioFlex® baseplate with Loading Stations™ and 6-well culture plates for use with a FX-6000™ Tension FlexLink®.

Tension

Creating a Bioartifical Construct with the Tissue Train® System

This video shows how to create a 3D collagen cell-seeded construct (or bioartifical tissue) with a linear Trough Loader™ and the Tissue Train® System. After the construct has polymerized, the FX-6000™ Tension System can be used with an Arctangle® Loading Station™ to apply uniaxial strain to the construct.

No results found.
There are no results with this criteria. Try changing your search.

Get In Touch

At Flexcell® International Corporation, we understand that our commitment to the highest quality products and customer service are core to our business. Reach out to us today to see how we can apply those principals to your business.